Marine Topside Boat Paint Primer for Fiberglass and Wood - Gray, Quart

About this item

• ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint; for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition
• COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat; apply a second coat only if a higher build is needed; to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer
• EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip; wear proper personal protection; work in a well-ventilated area; boat primer is chromate-free and lead-free
• DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F; marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint
• AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100; spray application - thin with xylene; do not apply Topside Primer thicker than recommended or it may not cure properly